Модуль Cisco C6800-16P10G

<p><strong>Описание C6800-16P10G</strong>: Модуль для коммутаторов Cisco Catalyst 6880-X.</p> <p> </p> <p>Основные особенности C6800-16P10G:</p> <p>• 16 ports of SFP / SFP+</p> <p>• Up to 4 Ports of QSFP*</p> <p>• Single DFC4-E for 60Mpps</p> <p>• 80Gbps Capacity per Slot</p> <p>• Fully integrated DFC-4E</p> <p>• Performance Mode for 1:1</p> <p>• 250/500MB Per Port TX Buffers</p> <p>• New Hardware RFID</p> <p>• Broadcasts PID and S/N</p> <p>• New C6807-XL Faceplate</p> <p>• 4 x 4-SFP Port-Groups</p> <p>• DFC4-E supports 16 x SFP Ports</p> <p>• New FIRE and Fabric ASICs</p> <p>• 55Gbps per Fabric Channel</p> <p>• 40Gbps per FIRE ASIC</p> <p>• 2:1 Oversubscribed @ FIRE ASIC</p> <p>•Performance Mode, per Port-Group</p> <p>• 10GE or 40GE Mode, per Port-Group</p> <p>• 1.25/2.5MB RX and 250/500MB TX</p> <p> </p> <p></p> <table> <tbody> <tr> <td> <p>1</p> </td> <td> <p>Status and ID LEDs</p> </td> <td> <p>4</p> </td> <td> <p>Port group ID</p> </td> </tr> <tr> <td> <p>2</p> </td> <td> <p>2</a></p> </td> <td> <p>5</p> </td> <td> <p>Port number</p> </td> </tr> <tr> <td> <p>3</p> </td> <td> <p>10G ports (A total of four port groups)</p> </td> <td> <p>6</p> </td> <td> <p>RFID</p> </td> </tr> </tbody> </table> <p> </p> <p>Характеристики</p> <table> <thead> <tr> <th> <p>Пункт</p> </th> <th> <p>Особенность</p> </th> </tr> <tr> <th> <p>Ports per module</p> </th> <th> <p>· 16 ports-Sixteen 1G ports, or sixteen 10G ports.</p> <p>· Ports are numbered left to right.</p> <ul> <li>2 port groups. Port ranges per port group:</li> </ul> <p>o 1 to 8</p> <p>o 9 to 16</p> </th> </tr> <tr> <th> <p>Port connector type</p> </th> <th> <p>LC (optical) or RJ-45 (copper) depending on the SFP transceiver installed.</p> </th> </tr> <tr> <th> <p>Cabling distance</p> </th> <th> <p>Depends on the SFP transceiver installed in the module port. For cabling distance information, refer to the installation guides for Cisco Transceiver Modules at: Install and Upgrade Guides</p> </th> </tr> <tr> <th> <p>Buffer size</p> </th> <th> <p>Ingress buffer size:</p> <p>· Per port (over subscription mode)-1.25 MB</p> <p>· Per port (transparent mode)-2.5 MB</p> <p>· 10 MB per port-group</p> <p>· Total-40 MB</p> <p>Egress buffer size:</p> <p>· Per port (over subscription mode)-250 MB</p> <p>· Per port (transparent mode)-500 MB</p> <p>· 2 GB per port-group</p> <p>· Total-8 GB</p> </th> </tr> <tr> <th> <p>QoS</p> </th> <th> <p>· Number of egress queues: 8</p> <p>· Number of ingress queues: 8</p> <p>· Number of thresholds per egress queue: 4</p> <p>· Number of thresholds per ingress queue: 4</p> </th> </tr> <tr> <th> <p>Maximum frame size</p> </th> <th> <p>Up to 9216 bytes per frame</p> </th> </tr> <tr> <th> <p>Module oversubscription rate</p> </th> <th> <p>2:1 (When all sixteen 10G ports are used.)</p> </th> </tr> <tr> <th> <p>Supervisor engine support</p> </th> <th> <p>Supervisor Engine 2T-10GE</p> </th> </tr> <tr> <th> <p>Software support</p> </th> <th> <p>With Supervisor Engine 2T-10GE -Cisco IOS Release 15.2(1)SY or later</p> </th> </tr> <tr> <th> <p>Queues per port</p> </th> <th> <p>With a WS-F6K-DFC4-E/ EXL daughter card:</p> <p>· Tx-1p7q4t</p> <p>· Rx-2p6q4t</p> </th> </tr> <tr> <th> <p>Chassis and slot restrictions</p> </th> <th> <p>The following restrictions apply to module installation and operation:</p> <p>· Module installation-Modules must be installed in adjacent slots. To maintain an adequate air flow through the chassis, install a switching-module filler plate (Cisco part number WS-X6K-SLOT-CVR-E=) in unused slots, rather than a blank slot cover (Cisco part number WS-X6K-SLOT-CVR=).</p> <p>· Module operation-C6800-16P10G/ 10G-XL operates only in a Cisco Catalyst 6807-XL and a Cisco Catalyst 6500 E-series chassis equipped with a Supervisor Engine 2T-10GE.</p> <ul> <li>Slot restrictions-In the following switch chassis, you cannot install Ethernet modules in slots meant for supervisor engines:</li> </ul> <p>o In a Cisco Catalyst 6807-XL, the supervisor engine slots are 3 and 4.</p> <p>o In a Cisco Catalyst 6513 E-series chassis, the supervisor engine slots are 7 and 8. This restriction does not apply to any other 6500 E-series chassis.</p> </th> </tr> <tr> <th> <p>Fabric connection</p> </th> <th> <p>For Cisco Catalyst 6807-XL switches:</p> <p>· Fabric channel 0 : Ports 1 to 8</p> <p>· Fabric channel 1: Ports 9 to 16</p> <p>For Cisco Catalyst 6500-E series switches:</p> <p>· Fabric channel 0 : Ports 1 to 8</p> <p>· Fabric channel 1: Ports 9 to 16</p> </th> </tr> <tr> <th> <p>Fabric channel speed</p> </th> <th> <p>In a Cisco Catalyst 6807-XL chassis-80 GB per second</p> <p>In a Cisco Catalyst 6500-E series chassis-80 GB per second</p> </th> </tr> <tr> <th> <p>Module upgrade availability</p> </th> <th> <p>PoE-Not supported</p> <p>Distributed forwarding- The C6800-16P10G module ships with a factory-installed DFC4-E and the C6800-16P10G-XL module ships with a factory-installed DFC4-EXL daughter card. The modules are not field upgradable.</p> </th> </tr> <tr> <th> <p>Pluggable transceivers support</p> </th> <th> <p>These Ethernet modules support 10G SFP+ modules and 1G SFP modules. For SFP transceivers currently supported, refer to the Cisco Transceiver Modules compatibility matrices at: Compatibility Information</p> </th> </tr> <tr> <th> <p>TDR support</p> </th> <th> <p>Supported with GLC-T (1G Copper SFP) transceivers</p> </th> </tr> <tr> <th> <p>Digital Optical Monitoring (DOM) support</p> </th> <th> <p>· The DOM-supported 1G transceivers are-GLC-BX-U, GLC-BX-D, GLC-SX-MMD, GLC-EX-SMD, GLC-LH-SMD, GLC-ZX-SMD, SFP-DWDM.</p> <p>· The DOM-supported 10G Fiber SFP/SFP+ transceivers are listed at Cisco Digital Optical Monitoring Compatibility Matrix.</p> </th> </tr> </thead> <tbody> <tr> <td> <p>Размеры (H x W x D)</p> </td> <td> <p>1.73 x 15.4 x 16.4 inches (4.39 x 39.11 x 41.65 cm)</p> </td> </tr> <tr> <td> <p>Вес</p> </td> <td> <p>11.02 lb (5.0 kg)</p> </td> </tr> <tr> <td> <p>Рабочая температура</p> </td> <td> <p>Certified for operation: 32° to 104°F (0° to 40°C)</p> <p>Designed and tested for operation: 32° to 130°F (0° to 55°C)</p> </td> </tr> <tr> <td> <p>Рабочая влажность (RH) ambient (noncondensing)</p> </td> <td> <p>10 to 90 percent</p> </td> </tr> <tr> <td> <p>Высота</p> &lt;</td> </tr> </tbody> </table>

Промо
Аренда	Да

Нет отзывов об этом товаре.