Интерфейсный модуль Juniper MIC3-3D-1X100GE-CXP

Software release

• 12.2 and later

For information about which MPCs support this MIC, see MIC/MPC Compatibility. For information about which MICs are supported on MX Series routers, see MICs Supported by MX Series Routers.

Description

• One 100-gigabit Ethernet port
• Power requirement: 0.42 A @ 48 V (20 W)
• Weight: 1.03 lb (0.47 kg)
• Model number: MIC3-3D-1X100GE-CXP
• Name in the CLI: 3D 1x100GE CXP

Hardware features

• High-performance throughput on each port at speeds up to 100 Gbps
• Up to 100-Gbps of full-duplex traffic
• Maximum transmission units (MTUs) of up to 9192 bytes
• The port is labeled PORT0

Software features

• Synchronous Ethernet support
• Optical diagnostics and related alarms
• Virtual Router Redundancy Protocol (VRRP) support
• IEEE 802.1Q virtual LANs (VLANs) support
• Remote monitoring (RMON) EtherStats
• Source MAC learning
• MAC accounting and policing—Dynamic local address learning of source MAC addresses
• Flexible Ethernet encapsulation
• Multiple tag protocol identifiers (TPID)

Cables and connectors

• Fiber-optic 100-gigabit CXP
  • Connector: 24-fiber MPO
  • 100GBASE-SR10 (model number: CXP-100GBASE-SR10)Optical interface specifications—see 100-Gigabit Ethernet 100GBASE-R Optical Interface Specifications

LEDs

OK/FAIL LED, one bicolor:

• Green—MIC is functioning normally.
• Red—MIC has failed.

LINK LED, one green per port:

• Off—No link.
• On steadily—Link is up with or without activity.
• Yellow—Link is disabled.