Подберем оборудование для вас
 

Cisco C6800-48P-SFP-XL C6k 48-port 1GE Mod:fabric-enabled with D

Производитель: Cisco
Код: C6800-48P-SFP-XL
1 100 736 р.
 

Модуль Cisco C6800-48P-SFP-XL C6k 48-port 1GE Mod:fabric-enabled with DFC4XL

Модуль C6800-48P-SFP-XL для коммутаторов серии Catalyst 6800 

 

Основные особенности:

• 48 ports of SFP

• Single DFC4-A for 60Mpps

• 40Gbps Capacity per Slot

• Updated 1G Port ASICs

• Fully integrated DFC-4A

• 1.5MB per Port buffering

• New Hardware RFID

• Broadcasts PID and S/N

• New C6807-XL Faceplate

 

1

Status LED

3

Even numbered ports

2

Odd numbered ports

4

RFID

 

 

Характеристики

Пункт

Особенность

Ports per module

48 ports. Ports are numbered left to right and top to bottom.

4 port groups. Port ranges per port group:

·         1 to 12

·         13 to 24

·         25 to 36

·         37 to 48

Port connector type

LC (optical) or RJ-45 (copper) depending on the SFP transceiver installed.

Cabling distance

Depends on the SFP transceiver installed in the module port. For cabling distance information, refer to the installation guides for Cisco Transceiver Modules at: Install and Upgrade Guides

Buffer size

1.5 MB per port

18 MB per port group

QoS

Number of egress queues—4

Number of ingress queues—2

Number of thresholds per egress queue—1 or 2

Number of thresholds per ingress queue—8

Maximum frame size

Up to 9216 bytes per frame

Module oversubscription rate

1.2:1

Supervisor engine support

Supervisor Engine 2T-10GE

Software support

With Supervisor Engine 2T-10GE —Cisco IOS Release 15.2(1)SY or later

Queues per port

With a WS-F6K-DFC4-A / AXL daughter card:

·         Tx—1p3q8t

·         Rx—2q8t

Chassis and slot restrictions

C6800-48P-SFP/ SFP-XL operates only in a Cisco Catalyst 6807-XL and a Cisco Catalyst 6500 E-series chassis equipped with a Supervisor Engine 2T-10GE.

Modules must be installed in adjacent slots. To maintain adequate air flow through the chassis, install a switching-module filler plate (Cisco part number WS-X6K-SLOT-CVR-E=) in unused slots, rather than a blank slot cover (Cisco part number WS-X6K-SLOT-CVR=).

Fabric connection

Dual switch-fabric connections:

·         Fabric channel 1—Even ports 2 to 48.

·         Fabric channel 2—Odd ports 1 to 47.

Fabric channel speed

20 Gb/sec

Module upgrade availability

PoE support—Not supported.

Distributed forwarding support— C6800-48P-SFP ships with a factory-installed DFC4-A and C6800-48P-SFP-XL ships with a factory-installed DFC4-AXL daughter card. The modules are not field upgradable.

Размеры (H x W x D)

1.2 x 14.4 x 16 in. (3.0 x 35.6 x 40.6 cm). Occupies one slot in the chassis.

Вес

C6800-48P-SFP—9.03 lb (4.1 kg)

C6800-48P-SFP-XL—8.70 lb (3.95 kg)

Рабочая температура

Certified for operation: 32° to 104°F (0° to 40°C)

Designed and tested for operation: 32° to 130°F (0° to 55°C)

Рабочая влажность (RH) ambient (noncondensing)

10 to 90 percent

Высота

Certified for operation: 0 to 6500 ft (0 to 2000 m)

Designed and tested for operation: -200 to 10,000 ft (-60 to 3000 m)

 

ПараметрыЗначения
Гарантия производителя
Срок 12 месяцев
Нет отзывов об этом товаре.

Написать отзыв

Ваше Имя:


Ваш отзыв: Внимание: HTML не поддерживается! Используйте обычный текст.

Оценка: Плохо           Хорошо

Введите код, указанный на картинке: